A Nitrite Electrochemical Sensor Based on Boron‐Doped Diamond Planar Electrochemical Microcells Modified with a Monolacunary Silicotungstate Polyoxoanion

A new boron doped diamond microcells (BDD) was modified, for rapid, selective and highly sensitive determination of nitrite, using a coating film of polyoxometalates (POMs), formed by cyclic voltammetry on the molecular p‐phenylenediamine (PPD) functionalized BDD. The scanning electron microscopy (SEM) technique was used to examine the morphology of (PPD/SiW₁₁) modified (BDD) electrode. It was found that (SiW₁₁) layer was uniformly formed on the electrode surface. It was observed that (BDD/PPD/SiW₁₁) showed excellent electrocatalytic activities towards nitrite ion. Under the selected conditions, the anodic peak maximum at ?0.6 V was linear versus nitrite concentration in the 40 µM–4 mM range, and the detection limit obtained was 20 µM. The newly developed electrode has been successfully applied to the determination of nitrite content in real river water samples.     

Construction of a Novel Carbon Paste Clarithromycin Sensor for Low Level Concentration Measurement,Applications to Pharmaceutical and Biological Analysis

A potentiometric carbon paste sensor was fabricated for determination of clarithromycin based on incorporation of the ion association complex of the clarithromycin‐phosphotungstate. The proposed sensor exhibited a Nernstian slope of 59.2±0.3 mV per decade for clarithromycin over a wide concentration range of 7.4×10^?7 to 1.5×10^?3 M, with a low detection limit of 5.0×10^?7 M. The proposed sensor manifested advantages of very fast response, long life time and, most importantly, excellent selectivity for clarithromycin relative to a wide variety of common foreign inorganic cation, and also biological species. The sensor was successfully applied to determine clarithromycin in clarithromycin tablet, blood serum and urine samples. The inclusion complex formation between β‐cyclodextrin and clarithromycin was studied by the proposed sensor. The influence of the temperature on the response of the sensor was investigated and the temperature coefficient of the sensor was calculated.     

Reductive Catenation of Phosphine Antimony Complexes

Reactions of triarylphosphines with fluoroantimony(III) triflates give phosphine antimony(III) complexes, which undergo spontaneous reductive elimination of fluorophosphonium cations. The resulting phosphine antimony(I) complexes catenate to give the first examples of cationic antimony bicyclic compounds, [(R₃P)₄Sb₆]⁴⁺, featuring a bicyclo[3.1.0]hexastibine framework stabilized by four phosphine ligands. The unprecedented 14‐electron redox process illustrates the generality of the reductive catenation method.     

The electrochemical reduction of CO2 on a copper electrode in 1‐n‐butyl‐3‐methyl imidazolium tetrafluoroborate (BMI.BF4) monitored by surface‐enhanced Raman scattering (SERS)

The electrochemical conversion of CO₂ into value‐added products using room temperature ionic liquids as solvent/electrolyte has been proposed as an alternative to minimize the environmental effects of CO₂ emissions. A key issue in the design of electrochemical systems for the reduction of CO₂ is the in situ identification of intermediate surface species as well as reaction products. Copper electrodes, besides being used as cathodes in the electrochemical reduction of CO₂, present surface‐enhanced Raman scattering (SERS) when properly activated. In this sense, the electrochemical reduction of CO₂ over a copper electrode in the room temperature ionic liquids 1‐n‐butyl‐3‐methyl imidazolium tetrafluoroborate (BMI.BF₄) was investigated by cyclic voltammetry and by in situ SERS. The cyclic voltammetries have shown that the presence of CO₂ on the BMI.BF₄ anticipates the reduction of BMI⁺ to the corresponding carbene. Fourier‐transform‐SERS spectra excited at 1064 nm and SERS spectra excited at 632.8 nm have shown vibrational signals from adsorbed CO. These SERS results indicated that CO adsorbs on the copper surface at two different surface sites. The observation of a 2275 cm⁻¹ vibration in the SERS spectra also confirmed the presence of chemically adsorbed CO₂. Other products of CO₂ reduction in BMI.BF₄, besides CO, were identified, including BMI carbene and the BMI‐CO₂ adduct. The SERS results also suggest that the presence of a thin film of Cu₂O on the copper surface anticipates the reduction of CO₂ to CO, an important component of syngas. Copyright © 2016 John Wiley & Sons, Ltd.     

ITO-free inverted organic solar cells fabricated with transparent and low resistance ZnO/Ag/ZnO multilayer electrode

Inverted organic solar cells (OSCs) based on poly (3-hexylthiophene) (P3HT):[6,6]-phenyl-C61 butyric acid methyl ester (PCBM) bulk heterojunctions (BHJ) were fabricated with optimized ZnO/Ag/ZnO multilayer and conventional indium–tin oxide (ITO) cathode electrodes and their performance was compared. The ZnO/Ag/ZnO multilayer films showed sheet resistances in the range 3.6–3.9 Ω/sq, while ITO exhibited 14.2 Ω/sq. On the one hand, the carrier concentration gradually decreased from 1.74 × 10²² to 4.33 × 10²¹ cm⁻³ as the ZnO thickness increased from 8 to 80 nm, respectively. The transmittance of the ZnO(40 nm)/Ag(19 nm)/ZnO(40 nm) films was ∼95% at 550 nm, which is comparable to that of ITO (∼96%). The multilayer films were smooth with a root mean square (RMS) roughness of 0.81 nm. OSCs fabricated with the ZnO(40 nm)/Ag(19 nm)/ZnO(40 nm) film showed a power conversion efficiency (2.63%) comparable to that of OSCs with a conventional ITO cathode (2.71%).     

氧化还原可逆Nb2TiO7复合阴极电解池高温水蒸气电解研究

系统地研究Nb₂TiO₇与Nb_1.33Ti_0.67O₄材料相互转变的氧化还原循环可逆性能,同时研究Nb2TiO7和Nb_1.33Ti_0.67O₄样品随温度和氧分压变化的电导率,并与复合电极对称电池和电解池的电化学性能相关联. 在830 oC下,对Nb_1.33Ti_0.67O₄复合电极电解池进行水蒸气的电解研究测试. 电流电压曲线和电解池短期性能测试表明在低电压下主要为电极的还原和活化过程;而在高电压下主要为水蒸气的电解. 当3%H₂O/Ar/4%H_{2气体通入阴极时电解池水蒸气电解的法拉第效率为98.9%;而当通入气体转换为3%H2O/Ar时效率为89%.}     

线-铝箔电极电晕放电激励器的推力理论与实验研究

空气电晕放电离子风激励器无需旋转部件, 仅通过消耗电能就能直接产生驱动力, 它是一种新型的动力技术, 备受国内外航空航天界的广泛关注. 目前对空气电晕放电离子风激励器的推力产生机理虽有各种解释, 但是现有理论均不能统一各种条件下的实验结果, 仍需要开展进一步的分析与研究. 本文以线-铝箔电极电晕放电激励器为研究对象, 通过实验研究发现作用在线电极与铝箔电极上的静电力不对称, 而且改变铝箔电极纵向高度和气压均能影响激励器的推力大小; 通过理论分析, 考虑电晕层与空间电荷的影响, 建立了线-铝箔电极电晕放电激励器的推力计算模型, 其计算值与实测值比较一致. 基于上述实验现象与理论建模分析, 本文认为线-铝箔电极电晕放电激励器的推力主要来源于线电极电晕产生的空间电荷对电极系统产生了不对称静电力作用, 使激励器出现净静电力作用.     

铜-钼源漏电极对非晶氧化铟镓锌薄膜晶体管性能的改善

在铜(Cu)和非晶铟镓锌氧化物(a-IGZO)之间插入30 nm厚的钼(Mo)接触层, 制备了具有Cu-Mo源漏电极的a-IGZO薄膜晶体管(TFT). Mo接触层不仅能够抑制Cu与a-IGZO有源层之间的扩散, 而且提高了Cu电极与玻璃基底以及栅极绝缘层的结合强度. 制备的Cu-Mo结构TFT与纯Cu 结构TFT相比, 具有较高的迁移率(～9.26 cm²·V^-1·s^-1)、更短的电流传输长度(～0.2 μm)、更低的接触电阻(～1072 Ω)和有效接触电阻率(～1×10^-4Ω·cm²), 能够满足TFT 阵列高导互联的要求.     

Numerical simulation of effects of flow maldistribution on heat and mass transfer in a PEM fuel cell stack

A 3D numerical study was carried out to analyze flow, heat and mass transfer first in a single half-cell cathode channel of proton exchange membrane (PEM) fuel cell. From practical point of view, it is necessary to put the appropriate number of cells in a stack. Hence, the above study on a single half-cell is extended to a stack of channels. Due to stacking, the assumption of uniform flow distribution would no longer hold true. Therefore, the channel flow-maldistribution is considered. The water formed at the active surface due to the electrochemical reaction diffuses through the porous layer and eventually enters the gas flow duct. The higher gas velocities in the duct result in faster water vapour removal which leads to a lower value of water vapour into the duct and hence a lower Nusselt number.     

小型静电陀螺仪电极面积及电极装配误差研究

介绍了小型静电陀螺仪的电极支承结构和电极面积误差引起的干扰力矩的计算公式,并根据影响电极面积的各种因素推导出了电极面积的误差范围。根据装配误差产生干扰力矩的情况确定了最终的装配精度,为电极的设计提供了重要的参考依据。